We present you a new version of the KiteLab bar, which combines unsurpassed reliability and affordable price.

Our team has invested a huge amount of time and effort in research and experiments to develop a technology for the production of a bar that would meet the requirements of the budget segment, but at the same time did not lose its quality and strength characteristics. We settled on the technology of injection molding from glass-filled nylon. Especially for this purpose, a huge machine for casting large parts was purchased for production.

Nylon filled with fiberglass is an incredibly durable material, which in most of its characteristics is not inferior to aluminum alloys. To give the bar even greater rigidity and strength, the central part is reinforced with two stainless steel plates. In its strength properties, the bar is superior to the carbon version, which makes it an ideal choice for demanding conditions of use at a lower cost.

The bar withstands bending loads, springing and maintaining its geometry. In addition, it has excellent resistance to shock loads. The central part of the bar is identical to the carbon version.

Now we have developed a mold to produce 48 cm long bar. However, soon we will start manufacturing other sizes of bars.

Control bar is 48 cm – weight 240 g.

Control bar comes complete with a case.

EVA colors available for order: red and yellow.

In addition to the bar, you can order any trimmer system, do not forget about the leader lines.

Watch the video review

A new version of our KiteLab V3 carbon bar with a completely updated design, using new technologies and materials.

• Bar 48 cm – weight 140 g.

• Bar 55 cm – weight 170 g.

• Bar 62 cm – weight 185 g.

The main goal in the development of the new model was to create the most comfortable, without sharp edges and protrusions, a safe bar with minimal weight. KiteLab v3 is suitable for both professional athletes and all kiters who need to feel maximum control over the kite. The bar is adaptive to any kites, trimmer systems and safety systems. Many new solutions are embodied in this product.

The bar is completely sealed against water ingress.

KiteLab V3 was developed by a professional designer in very close communication with top riders and the production department.
Many prototypes were made before deciding on the best shape and ergonomics. Our solution was to use a cross section that is close to the shape of an ellipse, it is more convenient than a round one and adds rigidity to our bar. Stylish endings allow you to wind a larger number of lines, as well as securely hold them during transportation.

Unlike most carbon bars, we do not use ready-made carbon tubes.
Our bar is completely moulded, which reduces the weight of the bar, increases strength and reliability, and also allows us to get any shape of the product, 100% monocoque. The bar is formed from a combination of longitudinal 80% and transverse 20% carbon fibers. The central part, as well as the endings, are laid in the matrix during molding, which gives us not only additional strength, but also tightness against water ingress.

The central opening of our bar is unique.
It is reinforced with inserts and this guarantees it greater strength. A metal insert protects the center hole from being rubbed, ensuring your bar is durable when used. Unlike the competition, the design of the bar does not thicken in the center, which gives you even more comfort when riding on the water.

It is possible to complete the carbon bar with any type of trimmer system, for example, a 1:2, 1:3 or 1:4 trimmer system.

This product includes leader lines with adjustment (2 pieces).

Detailed information on each trimmer system and their characteristics can be found in the "Learn more" section for each product.

The depower rope is the most heavily loaded element in terms of wear.
We had to experiment a lot to achieve the longest possible service life. We made the cord with a very dense weave so that sand particles do not get inside the line, and also applied a wax impregnation with our unique additives that reduce friction and do not wash out so quickly with water.

Watch the video review

A new version of our carbon bar KiteLab EVA V4.

• Bar 48 cm – weight 140 g.

• Bar 55 cm – weight 170 g.

• Bar 65 cm – weight 185 g.

The use of lightweight carbon bars has become a tradition for many riders. Carbon bars began to be used in completely different conditions both in summer and in winter. Comfort, reliability and, above all, quality, all this catches the rider. And we know better than anyone how to give it to him, we know our job.

As manufacturers, we always want to meet our riders, in this regard, we decided to make the most versatile carbon bar, which will take into account the best features and characteristics of a conventional carbon bar but will be as convenient to use in absolutely any conditions and under any riding styles.

The new carbon bar is covered with soft EVA material. This material does not absorb water and is very durable. At the same time, the increased strength is explained by the unique production technology. Our bar is completely moulded, which reduces the weight of the bar, increases strength and reliability, and also allows us to get any shape of the product, 100% monocoque. The bar is formed from a combination of longitudinal 80% and transverse 20% carbon fibers. The central part, as well as the endings, are laid in the matrix during molding, which gives us not only additional strength, but also tightness against water ingress.

For the convenience of fixing lines, the bar was supplemented with elastic bands at the ends.

The central opening of our bar is also unique.
It is reinforced with inserts, and this guarantees it greater strength. A metal insert protects the center hole from being rubbed, ensuring your bar is durable when used. Unlike the competition, the design of the bar does not thicken in the center, which gives you even more comfort when riding on the water.

It is possible to complete the carbon bar with any type of trimmer system, for example, a 1:2, 1:3 or 1:4 trimmer system.

This product includes leader lines with adjustment (2 pieces).

Detailed information on each trimmer system and their characteristics can be found in the "Learn more" section for each product.

The depower rope is the most heavily loaded element in terms of wear.
We had to experiment a lot to achieve the longest possible service life. We made the cord with a very dense weave so that sand particles do not get inside the line, and also applied a wax impregnation with our unique additives that reduce friction and do not wash out so quickly with water.

Watch the video review

A new version of our KiteLab V3 carbon bar with a completely updated design, using new technologies and materials.

• Bar 48 cm – weight 140 g.

• Bar 55 cm – weight 170 g.

• Bar 62 cm – weight 185 g.

The main goal in the development of the new model was to create the most comfortable, without sharp edges and protrusions, a safe bar with minimal weight. KiteLab v3 is suitable for both professional athletes and all kiters who need to feel maximum control over the kite. The bar is adaptive to any kites, trimmer systems and safety systems. Many new solutions are embodied in this product.

The bar is completely sealed against water ingress.

KiteLab V3 was developed by a professional designer in very close communication with top riders and the production department.
Many prototypes were made before deciding on the best shape and ergonomics. Our solution was to use a cross section that is close to the shape of an ellipse, it is more convenient than a round one and adds rigidity to our bar. Stylish endings allow you to wind a larger number of lines, as well as securely hold them during transportation.

Unlike most carbon bars, we do not use ready-made carbon tubes.
Our bar is completely moulded, which reduces the weight of the bar, increases strength and reliability, and also allows us to get any shape of the product, 100% monocoque. The bar is formed from a combination of longitudinal 80% and transverse 20% carbon fibers. The central part, as well as the endings, are laid in the matrix during molding, which gives us not only additional strength, but also tightness against water ingress.

The central opening of our bar is unique.
It is reinforced with inserts and this guarantees it greater strength. A metal insert protects the center hole from being rubbed, ensuring your bar is durable when used. Unlike the competition, the design of the bar does not thicken in the center, which gives you even more comfort when riding on the water.

Watch the video review

A new version of our carbon bar KiteLab EVA V4.

• Bar 48 cm – weight 140 g.

• Bar 55 cm – weight 170 g.

• Bar 65 cm – weight 185 g.

The use of lightweight carbon bars has become a tradition for many riders. Carbon bars began to be used in completely different conditions both in summer and in winter. Comfort, reliability and, above all, quality, all this catches the rider. And we know better than anyone how to give it to him, we know our job.

As manufacturers, we always want to meet our riders, in this regard, we decided to make the most versatile carbon bar, which will take into account the best features and characteristics of a conventional carbon bar but will be as convenient to use in absolutely any conditions and under any riding styles.

The new carbon bar is covered with soft EVA material. This material does not absorb water and is very durable. At the same time, the increased strength is explained by the unique production technology. Our bar is completely moulded, which reduces the weight of the bar, increases strength and reliability, and also allows us to get any shape of the product, 100% monocoque. The bar is formed from a combination of longitudinal 80% and transverse 20% carbon fibers. The central part, as well as the endings, are laid in the matrix during molding, which gives us not only additional strength, but also tightness against water ingress.

For the convenience of fixing lines, the bar was supplemented with elastic bands at the ends.

The central opening of our bar is also unique.
It is reinforced with inserts, and this guarantees it greater strength. A metal insert protects the center hole from being rubbed, ensuring your bar is durable when used. Unlike the competition, the design of the bar does not thicken in the center, which gives you even more comfort when riding on the water.

Watch the video review

The trimmer system with a gear ratio of 1:2 is perfect for freeride kiting, wave surfing and will provide maximum comfort when kiting on the water. Easy and reliable to use.

We use the lightest possible low friction ring with our branded pigtails. For the safety system, a small ring is installed for attaching a safety bungee line for one front line.

The updated KiteLab Clam Cleat allows you to adjust the length of both the trimmer system and the depower rope, as well as this Clam Cleat securely holds the trimmer rope.

The depower rope is the most loaded element in terms of wear.

We had to experiment a lot to achieve the longest possible service life. Especially for us, the leading manufacturer of the industry has made a cord with the densest weaving from Dyneema material. Due to the very high-quality weaving, sand particles do not get inside the rope. We also use special polyethylene impregnation with unique Teflon additives. These additives allow to reduce friction, sticking of sand particles, and increase the resistance of the rope three times compared to analogues.

We are constantly working together with our riders to improve our products to give you positive emotions while kiting.

Watch the video review

The 1:3 trimmer system is perfect for conditions where the wind is changeable and the trimmer rope needs frequent work. A great option for freeriders, professional riders of the hydrofoil disciplines, as well as young riders.

The 1:3 trimmer system has two blocks, the upper Ronstan block and the lower less loaded Norton block.

Thanks to this combination, the stroke of the trimmer rope has become much easier.

The updated KiteLab Clam Cleat allows you to adjust the length of both the trimmer system and the depower rope, as well as this Clam Cleat securely holds the trimmer rope.

The kit of the 1:3 trimmer system includes a safety bungee line.

The safety system has become very simple and reliable. We have specially made stainless steel rings of very small size. They allow you to quickly install frontlines, as well as to implement safety system on the frontline.

The depower rope is the most loaded element in terms of wear.

We had to experiment a lot to achieve the longest possible service life. Especially for us, the leading manufacturer of the industry has made a cord with the densest weaving from Dyneema material. Due to the very high-quality weaving, sand particles do not get inside the rope. We also use special polyethylene impregnation with unique Teflon additives. These additives allow to reduce friction, sticking of sand particles, and increase the resistance of the rope three times compared to analogues.

We are constantly working together with our riders to improve our products to give you positive emotions while kiting.

Watch the video review

The 1:4 trim system is an ideal option for riders who strive to get the best result in competitions and love the accuracy of controlling the kite's traction under any conditions. The trimmer system with a gear ratio of 1:4 is the most common among professional riders from all over the world. During a race with a heavy load, the 1:4 trimmer system is easier to work due to a larger gear ratio and, as a result, a lower load on the outgoing trimmer rope. Many athletes note that with this scheme, the trimmer rope is not so tightly clamped in the Clam Cleat, unlike 1:2 and 1:3. We use some of the best blocks, namely Ronstan, which in turn give the rider maximum smoothness and reliability.

The kit of the 1:4 trimmer system includes a safety bungee line.

The safety system has become very simple and reliable. We have specially made stainless steel rings of very small size. They allow you to quickly install frontlines, as well as to implement safety system on the frontline.

We have developed and produce our proprietary KiteLab platform for Clam Cleat, it is very reliable and has been tested by our leading riders. It allows you to hide the connections of the ropes inside the body while having minimal dimensions. Especially for this platform, we produce rubber stroke limiters, they absorb the impact of the bar, and add comfort for kiting.

The depower rope is the most loaded element in terms of wear.

We had to experiment a lot to achieve the longest possible service life. Especially for us, the leading manufacturer of the industry has made a cord with the densest weaving from Dyneema material. Due to the very high-quality weaving, sand particles do not get inside the rope. We also use special polyethylene impregnation with unique Teflon additives. These additives allow to reduce friction, sticking of sand particles, and increase the resistance of the rope three times compared to analogues.

We are constantly working together with our riders to improve our products to give you positive emotions while kiting.

Watch the video review

For freeride/freestyle on hydrofoil, many riders choose smaller kites. These kites are fast enough when turning and have a very good power reset. Especially for this style of riding, we have developed a new system that perfectly fits our KiteLab V3 carbon bar.

The name of this system is "Freestyle foil system".

The minimum number of elements in this system for less weight and more precise control of a small kite have become the main factors in the design of this system for our carbon bar. The smallest and lightest safety system is very easy to use, and its reliability has been tested with loads up to 500 kg. The guide ring on the depower rope allows you to quickly adjust the stroke length of the carbon bar. A simple and convenient solution with a knot on one depower rope allows you to quickly adjust the unevenly stretched frontlines of your kite. We use depower ropes of very dense weaving to reduce their wear when kiting.

This system is ideal for Clouds kites and the like.

Watch the video review

We offer you a version of the Release safety system "Open-Up", which, with its minimal size, provides high security and ease of use. The solution of such a small hook is suitable for riders both in winter and in summer, fans of riding on hydrofoil, as well as very young riders. The "Open-Up" system with a soft link is a reliable attachment that is chosen by riders participating in a hydrofoil discipline and freeride as well as those who like to hook the system to a rope.

This system is equipped with a ceramic bearing which allows the lines to unwind automatically. It is also worth noting that a plate is installed in the lower part of the system, which protects against accidental disclosure of the system.

Now the most common kite attachment system is a chickenloop, but for many riders it is not very convenient because of its large size, which reduces the stroke of the bar. Designing the Release safety system "Open-Up", we made many prototypes, experimented with the design and selected the optimal shape of the parts for trouble-free operation. The "Open-Up" system is tested for breaking up to a load of 350 kg, and a test is also performed to open the system under a load of 150 kg.

We try to make our sport as safe and comfortable as possible, developing new equipment, we are always in constant communication with our riders.

Specifications:
• Weight 120 g;
• Length 70 mm;
• Width 43 mm;
• Working stroke of 20 mm.

Watch the video review

We offer you a version of the Release safety system "Open-Up" QR, which, with its minimal size, provides high security and ease of use. The solution of such a small hook is suitable for riders both in winter and in summer, fans of riding on hydrofoil, as well as very young riders. The "Open-Up" QR system with a snap shackle has long been the most popular safety system among riders. The main advantage of this system is a two–stage safety.

This "Open-Up" QR model with a snap shackle implements a two-stage safety system and allows you not to use leash.

This system is equipped with a ceramic bearing which allows the lines to unwind automatically. It is also worth noting that a plate is installed in the lower part of the system, which protects against accidental disclosure of the system.

Now the most common kite attachment system is a chickenloop, but for many riders it is not very convenient because of its large size, which reduces the stroke of the bar. Designing the Release safety system "Open-Up" QR, we made many prototypes, experimented with the design and selected the optimal shape of the parts for trouble-free operation. The "Open-Up" QR system is tested for breaking up to a load of 350 kg, and a test is also performed to open the system under a load of 150 kg.

We try to make our sport as safe and comfortable as possible, developing new equipment, we are always in constant communication with our riders.

Specifications:
• Weight 165 g;
• Length 100 mm;
• Width 43 mm;
• Working stroke of 20 mm.

Watch the video review

We bring to your attention the KiteLab racing V-straps for use on hydrofoil boards. We have been experimenting with materials and structures for a long time to make them as suitable as possible for riding on hydrofoil.

The strap is a structure made of three layers of different materials. The upper layer is made of a 50 mm wide tape, it provides high strength and does not allow the strap to stretch. The second layer of very hard EVA material ensures the preservation of the shape of the strap without deformation. The third layer is a very soft EVA-material, it adheres to the foot, providing the best comfort, does not collect sand and water, does not rub the skin. Due to this design and the selection of materials, the strap is formed along the leg during riding and retains it's shape, while during a fall from the board, the rider's legs easily fly out of the straps, ensuring safety. The thickness of the strap is 10 mm and has a very small mass, only 95 grams. To adjust the size for your foot, we have arranged a number of holes for adjusting the straps.

We paid special attention to the pressure washers for the straps. Our washers provide maximum reliability from turning the strap, allow you to tighten the bolts on the board with great effort without deforming, both during tightening and during riding. Inside the washer there is a metal insert made of 2 mm stainless steel. On the outer plastic side there are teeth for holding the strap.

KiteLab racing V-straps are perfect for both professional riders and fans of hydrofoil riding.

The new chickenloop from KiteLab

The chickenloop has a significantly smaller size compared to previous models, its length does not exceed the size of the much-loved "Open Up" system.

It implements super easy unwinding of power lines thanks to the use of a large diameter ceramic ball bearing. The new chickenloop model provides for the untwisting of the safety line, now it does not twist.

The chickenloop loop is available in two sizes for different riding styles: a large loop with a length of 210 mm and a small loop with a length of 130 mm. It is important to note that the loop and finger of the chickenloop are made of frost-resistant polyurethane, which is an important criterion for winter. The material retains its properties even at low temperatures.

Watch the video review

Sets of flying lines by Robline.

To date, these are some of the best lines in the world with very high-quality weaving.

You can order a set of flying lines of any length from 1 meter.

We install loops at the ends of the lines.

A set of lines consists of 4 lines in one set.

Frontlines: Robline CAPETOWN FL-400 1.7 mm grey (Dyneema ® SK78).

Backlines: Robline MAUI FL-389 1.3 mm red (Dyneema ® SK99).

"Dyneema" (Dyneema ® ) is a fiber made of high molecular weight polyethylene. This heavy-duty polyethylene fiber is produced using a unique process, as a result of which the molecules acquire a new parallel orientation, which gives the fiber unique properties.

Dyneema is a synthetic material that combines properties such as resistance to moisture, light weight (does not sink in water), resistance to almost any kind of chemicals and ultraviolet rays and incredible strength exceeding even steel.

Watch the video review

Type of rope dyneema 12-strand, diameter 2.5 mm.

This type of dyneema has a more dense weave in contrast to its analogues, which improves the strength characteristics and service life of the rope. Increased protection against the ingress of abrasive material into the rope fibers, such as sand.

Watch the video review

The Safety Bungee Line consists of 2 types of rope.

The first type, dyneema 16-strand. This type of dyneema has a more dense weave in contrast to its analogues, which improves the strength characteristics and service life of the rope. Increased protection against the ingress of abrasive material into the rope fibers, such as sand.

The second type, Liros high-elasticity rubber cable, diameter 2.5 mm. This cable has a high percentage of stretching. The core is made of highly elastic latex rubber, and the stretchable shell is made of wear-resistant, elastic polyester.

Watch the video review


The depower rope is the most heavily loaded element in terms of wear.

We had to experiment a lot to achieve the longest possible service life. We made the cord with a very dense weave so that sand particles do not get inside the line, and also applied a wax impregnation with our unique additives that reduce friction and do not wash out so quickly with water.

Watch the video review


Liros rope, diameter 6 mm.

Works perfectly in the KiteLab Clam Cleat. Increased protection against the ingress of abrasive material into the rope fibers, such as sand.

Watch the video review

Ronstan block 20 mm.

Features:

• Integrated stainless steel hub to accept lashing attachment and through-sheave becket;
• Suits up to 4mm (5/32") lashing.

This system is ideal for 1:2, 1:3 and 1:4 trimmer systems and for implementing a safety system. Reliable and easy to use. Choose the type of system you need.

Watch the video review


Ronstan block 20 mm.

Features:

• Integrated stainless steel hub to accept lashing attachment and through-sheave becket;
• Suits up to 4mm (5/32") lashing.

Watch the video review


It is possible to order rings of different diameters and types.

1 Type:

• Inner diameter 4 mm;
• Wire diameter 3 mm;
• Outer diameter 10 mm.

2 Type:

• Inner diameter 11 mm;
• Wire diameter 4 mm;
• Outer diameter 19 mm.

3 Type:

• Inner diameter 17 mm;
• Wire diameter 4 mm;
• Outer diameter 25 mm

4 Type:

• Inner diameter 27 mm;
• Wire diameter 4 mm;
• Outer diameter 35 mm.

Ring with «ear»:

• Inner diameter 27 mm;
• Wire diameter 4 mm;
• Outer diameter 35 mm.

Ring with a T-shaped stop Type 1:
Two identical rings:

• Inner diameter 18 mm;
• Wire diameter 3,5 mm;
• Outer diameter of 25 mm.

Ring with a T-shaped stop Type 2:
The first ring:

• Inner diameter 18 mm;
• Wire diameter 3,5 mm;
• Outer diameter of 25 mm.

The second ring:

• Inner diameter 27 mm;
• Wire diameter 4 mm;
• The outer diameter is 35 mm.

Watch the video review


KiteLab cover - this is a practical and roomy case for storing and transporting your bars. It's working length is designed for bars up to 62 cm in size. The case has a mesh for better evaporation of moisture and a loop so that you can hang the bars for storage or drying.

Up to three complete sets of KiteLab bars can be placed inside.

Watch the video review

It is possible to install both knots and loops at the ends of pigtails.

Pigtails are very important to protect the connection of your flying lines, facilitate the connection and disconnection of your lines from the kite and, in addition, ensure compatibility between kites of different brands.